Premium Bathroom Remodel
Chevy Chase, MD
This premium bathroom remodel in Chevy Chase, MD rebuilt a ~95 sq ft bathroom to a high-end spec. The brief: a calm, modern space with materials that match the quality of the home.
The frameless walk-in shower is wrapped in large-format tile over full waterproofing, with radiant floor heat underfoot for Maryland winters. Matte black fixtures give the room its edge.
A floating vanity with a stone countertop and a backlit LED mirror anchor the main wall, and a wall-hung toilet keeps the floor line clean — a small detail that makes a small room feel bigger.
The project ran 5–8 weeks from demo to walkthrough, handled start to finish by Think2Remodel, a licensed Montgomery County contractor (MHIC #159517).
Planning something similar? See our bathroom remodeling services, browse more work in Chevy Chase, or get a free quote.
24×48 porcelain slab tile on bathroom floors and shower walls — minimal grout lines, maximum impact. This is the kind of bathroom tile installation in Maryland that makes a small room feel twice the size. Every tile was back-buttered and installed on a fully waterproofed, mud-set substrate for a surface that stays flat and watertight for decades.
A frameless, floor-to-ceiling glass enclosure with a zero-threshold entry, recessed linear drain, and dual showerheads on a thermostatic valve system. Walk-in shower installation in Maryland done at the highest level — curbless design for accessibility, full waterproof membrane under every tiled surface, and no silicone-only shortcuts where mortar belongs.
Wall-mounted floating double vanity with soft-close drawers, a honed natural stone countertop, and undermount rectangular sinks. Matte black fixtures throughout to tie the palette together. This is the type of bathroom renovation in Montgomery County MD that sets the tone for the rest of the home — refined, intentional, built with real materials that improve with age.
Electric radiant heat mat installed under the floor tile on a programmable thermostat — a detail that separates a premium bathroom remodel from a standard one. Think2Remodel (MHIC #159517) coordinates all electrical rough-in with licensed subcontractors so the heat system is installed correctly from the start, not retrofitted through finished work later.
Matte black rainfall showerhead and hand shower, wall-mount faucets, vessel-style sink hardware, a backlit LED mirror, and a wall-hung toilet with a concealed in-wall tank. Every fixture was specified for finish consistency and long-term durability — the kind of selection that holds up when you look at the bathroom five years after the full bathroom remodel cost Maryland homeowners ask about upfront.
Complete tear-out to studs, cement board on all wet walls, RedGard waterproof membrane at every seam and floor-wall transition, and Schluter edge profiles at all transitions. The substrate is the part of a premium bathroom renovation that no one sees — and it's exactly where corners get cut on jobs that fail. We don't cut them.
"We had quotes from three contractors before going with Think2Remodel. The others were cheaper — but when we sat down with them, it was clear they were cutting corners on the substrate and waterproofing. Think2Remodel walked us through exactly what they were going to do and why. The finished bathroom is stunning. The large-format tile, the frameless glass, the radiant heat — it feels like a high-end hotel. Worth every dollar."