Master Bathroom Renovation
Germantown, MD
This master bathroom renovation in Germantown, MD turned a ~110 sq ft primary bath into a true master suite retreat — the largest bathroom project in this series.
The layout pairs a freestanding soaking tub with a separate walk-in shower finished in herringbone tile, fully waterproofed behind every wall. Brushed nickel fixtures keep the finish palette soft and timeless.
A double vanity with backlit LED mirrors gives both owners their own space, and a wall-hung toilet completes the clean, modern floor line.
Bathroom remodeling in Germantown, MD at this scope runs 5–8 weeks — this one was handled start to finish by Think2Remodel, a licensed Montgomery County contractor (MHIC #159517).
Planning something similar? See our bathroom remodeling services, browse more work in Germantown, or get a free quote.
Sixty-inch double vanity with soft-close doors and drawers, a continuous honed quartz countertop, and two undermount sinks — finally a primary bathroom that doesn't require scheduling. Brushed nickel faucets with separate controls. This is the kind of bathroom renovation in Montgomery County MD that immediately changes how a morning feels.
Full walk-in shower with wall-to-ceiling tile, a built-in niche, and a pressure-balanced thermostatic valve with separate volume controls for the rainfall head and handheld. Walk-in shower installation in Maryland requires proper waterproofing behind every tiled surface — we use a continuous membrane system, not tape and silicone as a substitute. Built to last, not just to photograph.
Oval freestanding soaking tub on a tiled platform with a floor-mounted tub filler in brushed nickel. Not every homeowner wants a soaking tub in their master bathroom, but when they do, it needs to be positioned correctly and plumbed right — drain location, floor support, and supply lines all planned before a single tile goes down. This is the full bathroom remodel cost Maryland homeowners ask about: the answer is in the planning.
Large-format porcelain tile on floors in a herringbone pattern, matching tile carried up the shower walls and tub surround for a seamless, cohesive look. Bathroom tile installation in Maryland done on a properly prepared substrate — mud-set shower floor, cement board walls, Schluter edge profiles at all transitions. No shortcuts on the materials you can't see.
New elongated wall-hung toilet, brushed nickel hardware throughout, dual vanity mirrors with integrated LED lighting, a lighted medicine cabinet for storage, and a new exhaust fan rated for the room size. Think2Remodel (MHIC #159517) coordinates all electrical work through licensed subcontractors — the lighting and fan rough-in is done before the tile, not after.
Full demolition to bare studs and subfloor, inspection and correction of any moisture damage found, cement board throughout all wet zones, RedGard waterproof membrane at every seam, corner, and floor-wall transition. A master bathroom renovation in Maryland is a big investment — the waterproofing is what protects it for the next twenty years.
"Our master bathroom had a single vanity, a fiberglass tub-shower combo, and no storage. Think2Remodel turned it into the double vanity, soaking tub, and walk-in shower setup we'd been planning for years. The tile work is beautiful, everything works perfectly, and they were finished exactly when they said they would be. Couldn't be happier."